OK so it has been a while since I have been back here but I thought I’d post an update to the camera slider. I’ve been looking at simplifying the electronics part of it and have managed to potentially do away with the Sparkfun Arduino ProtoShield Kit. Instead I’m looking at putting the components that are on the Protoshield on a single board with the Arduino.

I’ve looked at two main development boards: the Adafruit MENTA – Mint Tin Arduino Compatible Kit with Mint Tin and the SpikenzieLabs Prototino ATMega328- Kit. Both are very good but I’ve decided to try the Prototino simple because it is smaller. The kit pictured below, is easy to assemble. (image courtesy of Spekenzielabs)

Prototino ATMega328- Kit - Click Image to Close

and makes a nice small package once complete. You will need either another Arduino to program the chip or use an USB FTDI adapter/cable, or simply transfer the chip from another build..


As far as space goes a preliminary placement of the main parts shows that there is plenty of space to put the Big Easy Driver and the optocouplers as well as the resistors and the connecting wires.


I’ll play around with placement a bit more and will hopefully have an operational replacement for the original build up and running soon. It will easily fit into the original box as well.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Blog at WordPress.com.